Compression Lows with Type 1 Diabetes: Why Your CGM Drops Overnight and What to Do
Technology & CGM19 November 20265 min read

Compression Lows with Type 1 Diabetes: Why Your CGM Drops Overnight and What to Do

Waking up to a CGM low alarm that isn't real? Learn what compression lows are, how to spot them, and practical ways to cope with Type 1 Diabetes.

What Is a Compression Low?

You're sound asleep, and suddenly your CGM is screaming that you're plummeting. You roll over, grab your phone, and see a steep drop. But when you do a fingerstick, your blood sugar is perfectly fine.

Congratulations, you've just met a compression low, sometimes called a pressure-induced sensor attenuation or PISA. If you live with Type 1 Diabetes (T1D) and wear a CGM, chances are you've run into one. They're annoying, but they're also very common, and there are ways to make them less disruptive.

Why Compression Lows Happen

Most CGMs measure glucose in the interstitial fluid, the thin layer of fluid just under your skin, not directly in your blood. When you lie on your sensor, pressure on the area can temporarily squeeze that fluid away or reduce how well it flows around the sensor filament. With less fluid reaching the sensor, it reads lower than your actual glucose.

Once you move off the sensor, fluid flow returns and the reading usually bounces back up, often fairly quickly.

Common Triggers

  • Sleeping on the arm, thigh, or abdomen where your sensor sits

  • Leaning on the sensor against a firm surface, like an armrest or car seat

  • Tight clothing, straps, or waistbands pressing on the site

  • A sensor placed where a pillow, partner, or pet often presses against you

  • Seat belts or bag straps rubbing across the sensor

How to Tell If a Low Might Be a Compression Low

No single clue is foolproof, but these patterns can help you spot one:

  • The drop is sudden and steep, with no obvious cause like recent insulin, exercise, or a delayed meal.

  • It happens at night or while you're lying down, especially in the same position.

  • The graph looks oddly sharp, a sudden cliff-like drop followed by a quick recovery.

  • You feel fine, with no shakiness, sweating, or other signs you usually notice.

  • It repeats around the same time on different nights, often when you shift into your favorite sleeping position.

Looking back at your CGM graph the next morning can be revealing. A sharp dip and rebound with no carbs eaten in between is a classic compression-low shape.

What to Do When Your CGM Says You're Low

Here's the tricky part: you can't assume every overnight low is fake. A real low is a real risk, so the safest habit is to verify first whenever you're unsure.

Quick Steps

  1. Check with a fingerstick if you can. A meter reading is the most reliable way to confirm what's going on.

  1. Follow your care team's guidance for treating confirmed lows.

  1. If it's a compression low, shift position so you're off the sensor and watch the graph. It may climb back on its own.

  1. Make a note of the time and where the sensor was, so you can spot patterns later.

If you ever feel symptoms of a low, or you're simply not sure, don't wait around. Treat according to the plan you've made with your diabetes care team. It's always okay to be cautious.

Practical Ways to Prevent Compression Lows

You can't always avoid them, but you can reduce how often they happen.

Rethink Your Sensor Placement

  • Choose sites you're less likely to sleep on. If you're a side sleeper, try the back of the opposite arm or a spot that stays free of pressure.

  • Pay attention to which side you favor at night, and place your sensor accordingly.

  • Follow your CGM manufacturer's approved sites. Different systems have different recommendations.

Adjust Your Sleep Setup

  • Use a pillow behind your back or between your arm and body to take pressure off the sensor.

  • Try a body pillow that keeps you from rolling onto your sensor.

  • Consider softer bedding or a different sleeping position if one spot keeps triggering alerts.

Watch Your Clothing and Gear

  • Skip tight waistbands or elastic bands that press on your sensor.

  • Check how your bag strap, bra band, or seat belt sits.

  • Some people use soft sensor covers or protective patches to cushion the area. Make sure anything you add doesn't block the sensor or interfere with adhesion.

Keep a Simple Log

If false lows keep waking you, jot down:

  • Which site the sensor was on

  • Which side you slept on

  • What time the alarm occurred

  • Whether a fingerstick confirmed it

After a couple of weeks, you may notice a clear pattern, like "left arm sensors always cause trouble." That's useful information to share with your care team.

Protecting Your Sleep (and Your Sanity)

Repeated false alarms can wear you down. Interrupted sleep affects mood, energy, and even how you handle diabetes the next day. A few ideas:

  • Review your alert settings. Some systems let you customize urgency or add a delay on certain alerts. Talk with your care team before changing low alert thresholds, since safety comes first.

  • Keep a fingerstick kit by your bed so verifying is quick and doesn't require a hunt in the dark.

  • Don't beat yourself up. Treating a low that turned out to be fake isn't a failure. It's your CGM doing what it's built to do: err on the side of caution.

Don't Let Compression Lows Distort Your Data

False lows can skew your CGM reports. They might make your time-in-range look different or suggest overnight lows that aren't real. When reviewing your data:

  • Look for sharp dips followed by fast rebounds

  • Cross-reference with your notes about sleep position

  • Point them out to your care team so they don't misread the data when discussing your insulin plan

If you track meals and insulin in iSpike, keeping consistent notes about your sensor site and unusual readings can also help you separate real patterns from sensor quirks.

When to Reach Out for Help

Contact your care team or CGM manufacturer if:

  • Compression lows are happening nearly every night

  • Your readings often don't match fingersticks, even without pressure

  • You're unsure whether your lows are real

  • Sensor placement changes haven't helped

They can help troubleshoot, and manufacturers will often replace sensors that perform poorly.

The Bottom Line

Compression lows are one of those quirks of life with T1D technology: frustrating, but manageable. With smarter placement, a bit of sleep-position awareness, and the habit of verifying questionable readings, you can cut down on those middle-of-the-night false alarms and get better rest.

This article is for informational purposes only and does not replace advice from your diabetes care team.

compression lowsCGMtype 1 diabetesovernight lowssensor placementfalse low alarmsCGM accuracysleep

Disclaimer: This article is for informational purposes only and does not replace advice from your diabetes care team. iSpike is a meal tracking tool, not a medical device.

Counting carbs for every meal? iSpike does it from a photo.